|
Tiny, Wireless HawkEye Motion
Sensors!
|
Designed for indoor use, this motion sensor is
perfect for automatically lighting your hallway or basement.
|
|
HOT! Tiny, Wireless Motion
Sensors!
The Hawkeye Motion Sensors are
small, sleek and very powerful! They supercharge any home and
lifestyle by removing the need for switches and buttons. You
can now make things happen as soon as you walk in a room!
|
 |
The Hawkeye II Motion Sensor sends wireless Radio
Frequency (RF) signals to a Transceiver or any
security system base receiver. The Transceiver receives the
signals from the Motion Sensor and passes them onto your house
wiring.
These
signals are then received by lamp, appliance, or wall
switch modules to control lights (or appliances) around the
home.
If you set
the Hawkeye II Motion Sensor to a unique code (House
Code A and Unit Code 1), then walk into the room where the
Hawkeye II Motion Sensor is located, a lamp module set to "A1"
will turn on. As long as you keep moving, the light will stay
on, and when you stop moving, the light turns off after the
amount of time you select.
The
signals transmitted onto your house wiring can also be
received by the two-way Computer Interface to initiate
macros. The Computer Interface then performs a sequence of
events that you've set it up to do.
Special Features:
-
You can
easily disable the dawn/dusk feature so it will work 24
hours/day! No need to cover photo-cell with black
tape.
-
It has
adjustable time delay! You can set the delay from 1 minute
to 255 minutes! Now you can have the flexibility to have
your lights, appliances, or even Macros turn off just 60
seconds after you leave the room (The old version had only 1
setting of 6 minutes)
|